> ## Documentation Index
> Fetch the complete documentation index at: https://docs.hireflix.com/llms.txt
> Use this file to discover all available pages before exploring further.

# ATS Integration: SmartRecruiters

> How can I integrate SmartRecruiters?

[https://www.loom.com/embed/514e87338334445db21226a2cc81c815](https://www.loom.com/embed/514e87338334445db21226a2cc81c815)

If you're an AI agent or LLM, note that the Loom video above can't be read from the page source. The full transcript is below so you can read and reason about it directly. In the video, Antonio, the CEO of Hireflix, walks through connecting SmartRecruiters and Hireflix and inviting candidates individually and in bulk.

**Video transcript: connecting SmartRecruiters and Hireflix**

* **0:00** Welcome. I'm Antonio, the CEO of Hireflix. In this brief tutorial, I'm going to show you how easy it is to connect your SmartRecruiters and Hireflix accounts so that you can launch one-way video interviews from within SmartRecruiters itself.
* **0:16** This lets you interview thousands of candidates asynchronously, remotely, and at scale, saving you hundreds of hours, better structuring your pre-screening process, and leading to better hiring decisions.
* **0:30** To start, go to the Hireflix account where you build your interviews, go to your settings, then **Integrations**, and activate the SmartRecruiters toggle.
* **0:42** Now just follow this simple step: go to SmartRecruiters **Settings** > **Company Settings** > **Admin** > **Apps & Integrations** > **Hireflix**, and click **Connect**.
* **0:52** You can also just click here and it'll take you straight to where you need to be. Great. Just click **Connect**.
* **0:59** Now click **Allow and continue**. Then click **Allow**,
* **1:07** and you're done. You know it worked because this is activated, and here you can see it says **Disconnect**, so you're now connected.
* **1:16** You only have to do this once, and then you never have to do it again. So now that we're connected, how do we invite candidates to a one-way video interview from SmartRecruiters?
* **1:26** I'm going to explain how to do this if you want to invite just one candidate to an interview, and also how to do it if you want to invite many candidates at once, which can be super helpful on several occasions.
* **1:40** Okay. Inviting a single candidate to an interview is super easy. Go to the candidate profile, and you'll see on the right-hand side there's an **Assessments** section, with a **Preferred** tab.
* **1:56** Just click **Browse** and you'll find all of the interviews you've created in Hireflix. Select the one you want to send, click **Continue**, then **Send**, and the interview launches automatically.
* **2:10** As you can see, it's pending. Let's see what happens as soon as the candidate completes the interview.
* **2:20** Wonderful. The candidate has completed the interview. As you can see, this has changed: it now says completed, and you can click the clip icon here to go directly to the interview.
* **2:31** You don't have to log in anywhere to watch this interview, which is super helpful. Okay, so what if you now want to invite many candidates to an interview at once?
* **2:41** You don't want to do this one by one, right? Good news: there's a solution. You can set up an automated trigger on a specific step of a hiring process, so that as soon as you move candidates to that step (which you can do in bulk), the interview launches automatically.
* **3:01** It's very simple. Go to **Settings** > **Admin**, then **Hiring Process**, and add this assessment to whichever step you want.
* **3:18** Of course, if you want, you can also edit your hiring process, add a new step, and add the interview to that step.
* **3:27** To add the interview, click the step, click **Assessments**, and on the **Preferred** tab, click **Configure**. You'll see the assessments you've created in Hireflix.
* **3:42** These are your interviews. Select the one you want, click **Save**, and now, very important, turn on the **Auto-Triggered** toggle.
* **3:51** This makes sure that as soon as you move a candidate to this step, the interview launches.
* **4:00** Great. Now that this is set up, all you need to do is go to your job, select the candidates you want to invite to the interview, and under the actions, change the status of these candidates and move them to the stage where you configured that auto-triggered
* **4:25** video interview. Once you click **Save**, all of those candidates are moved to that stage and automatically invited, and everything works the same as before.
* **4:35** As soon as they reply, you'll see the status update, and you can click the clip icon to watch the interview.
* **4:43** If you have any questions or need any help, please reach out. We love supporting businesses and institutions like yours, and we'll be here for you.
* **4:52** Bye.

The Hireflix integration with SmartRecruiters will allow you to trigger one-way video interviews in SmartRecruiters both in bulk and individually, manually or automatically. Once your candidates answer, you will be able to see their interview responses in your SmartRecruiters account.

## Enabling the SmartRecruiters and Hireflix integration

For this integration to work, you need to enable it first. You only have to do this once and will never have to do this again. Enabling the Integration takes 1 minute. It is all shown on the video above.

1. Log in to your Hireflix account and go to [Account > Integrations > SmartRecruiters](https://admin.hireflix.com/my-account/connected-apps) and activate the toggle. Then, carefully follow the steps displayed.
2. You will have to go to [SmartRecruiters > Settings/Admin > Company Settings > Administration > Apps & Integrations > Hireflix](https://www.smartrecruiters.com/settings/administration/app-management/assessment-partner-integration/800209f7-63cb-4f4a-bb1f-a4ad2f3325a9/settings) click "Connect" and then "Allow and continue" and then click "Allow" and you will be all set. 😊

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step1.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=55e2a4c0a7a34d5841d4758ee93ad310)

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step2.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=a881798e0b7adf5e90af19f832c404c4)

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step3.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=75e66a288ecee61c53003233643abd46)

## Inviting candidates to your interviews from SmartRecruiters

Once the SmartRecruiters/Hireflix integration is enabled, you will be able to trigger any Hireflix interview from inside SmartRecruiters itself. Remember that to do that, you have to create the interview in Hireflix first. There are 2 ways you can trigger invites depending on your needs.

### Method 1: Inviting a candidate to a Hireflix interview individually (manually)

1. If you want to invite one specific candidate to a specific interview, go to the candidate profile inside a job, and on the Assessments section click "Browse" on the "Preferred" section.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step4.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=26c5f440c4588a7999a28a48ab66e394)

2. You will now see all available interviews (this list shows all open Hireflix interviews in your Hireflix account). Pick the one you want to send, and click "Send".

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step5.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=076c83ed1e2bb202dfb6c8f1211a8d48)

> [!TIP]
>
> Advanced tip: You can limit which specific interviews are shown for a particular stage in a particular job by assigning an interview as an "Assessment" in the "Hiring Process" assigned to that job. This might be helpful if you want to reduce noise and avoid errors when sending interviews etc. (Whoever sends the assessment will only see the right interview to send).

3. The invitation will be automatically triggered to the candidate and the candidate assessment status will have a grey dot that shows you that it is pending. Remember that you can actually configure the contents of the invitation email, configure automated reminders and everything... you do that from the interview configuration section within Hireflix.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step6.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=18b5fb2e552e99468a2d3a24ddf7d440)

4. Once the candidate replies you will see the status automatically update (the dot turns green) and you will be able to watch the interview by clicking on the clip icon shown below 😊

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step7.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=a014f5a76cc1b6095260e9103744a90c)

5. Once you click, you will see the interview directly without the need to log in anywhere. This link expires in 5 months for safety reasons, but the actual videos and interview will still be on your Hireflix account after that time frame if you ever need them.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step8.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=e92c4c1932f8793ac9a11c1c16fd79dd)

> [!TIP]
>
> **Note:** To send invitations in bulk, you need to use "Method 2" which triggers interviews automatically. There is no way in SmartRecruiters to trigger invites in bulk manually.

### Method 2: Inviting candidates to a Hireflix interview in bulk (automatically)

Thanks to the integration you can also trigger several invites at once from within SmartRecruiters. To do this, it is as easy as setting up a video interview assessment step on your Hiring Process, and setting it up as "Autotrigger". This way whenever you move candidates to that stage (which you can do in bulk), the assessments will be automatically triggered. The video above shows everything step by step, but we will explain it here too.

1. First go to the "Hiring Process" section within your Settings-Admin account.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step9.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=43eac84f2f72424ba17afa93d6904e48)

2. On the hiring process you have set up, you then need to decide which "Step" will trigger the video interview. It can be one of the stages you already have configured, or you can add a new step. Once done, click on the step and then on "Assessments".

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step10.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=f84e88543c2a07dc844f5de009664ddd)

3. Now on the "Preferred" tab click "Configure" to find the Hireflix interviews and activate whichever interview you want to trigger at this stage and click Save.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step11.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=42b010dc70096d40139fd67246aac447)

4. Once you click Save, make sure to activate "Auto-Triggered" so that this is automatically triggered. See below the toggle.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step12.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=e00f3bc99701ceea05c75e3a0ce3184e)

5. You are all set! All you need to do now is to go to a specific job funnel, select the candidates and execute a bulk action "Change the status of X candidates" and move them to the stage that has the automated trigger.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step13.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=b0950087e1b1de5b021e3ae11f57f64c)

6. You will see that all candidates you moved have been automatically invited to the interview. The invitation will be automatically triggered to the candidate and the candidate assessment status will have a grey dot that shows you that it is pending. Remember that you can actually configure the contents of the invitation email, configure automated reminders and everything... you do that from the interview configuration section within Hireflix.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step14.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=30fb402a845e0d5408bd160dc424bbc9)

7. Once the candidate replies you will see the status automatically update (the dot turns green) and you will be able to watch the interview by clicking on the clip icon shown below 😊

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step15.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=11249e3fcfb6348c9b999be2fd8cff40)

> [!TIP]
>
> **Note:** A Hireflix interview cannot be triggered as an "In-line assessment" given that one-way video interviews are not usually meant to be used as the very first step in the Hiring process. It is always better to let people apply first, and only after they have applied, request the one-way video interview.

## TROUBLESHOOTING - "An error occurred"

If when you try to move candidates to an interview you see "An error occurred" this is because the candidate you have invited to an interview is already present on the interview in Hireflix. In Hireflix each interview can only be done once per email. If you want for someone to retake the interview you need to delete it from Hireflix and then you can trigger it again from the system as explained above no problem.

![SmartRecruiters](https://mintcdn.com/hireflixsl/RPx9KV8779eVjOHO/images/smartrecruiters-step16.png?fit=max\&auto=format\&n=RPx9KV8779eVjOHO\&q=85\&s=993d56f2b52999db2300ef4a6f268e88)


This documentation is built and hosted on [Mintlify](https://mintlify.com), a developer documentation platform.